#1858 操作失败，请稍后重试('No audio was received. Please verify that your parameters are correct.',):Traceback (most recent call last):

158.94* Posted at: 4 hours ago 👁13

操作失败，请稍后重试('No audio was received. Please verify that your parameters are correct.',):
Traceback (most recent call last):
File "videotrans\tts\_base.py", line 128, in run
RuntimeError: no running event loop

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "videotrans\util\ListenVoice.py", line 18, in run
File "videotrans\tts\__init__.py", line 246, in run
File "videotrans\tts\_base.py", line 182, in run
File "videotrans\tts\_edgetts.py", line 70, in _create_audio_with_retry
File "asyncio\tasks.py", line 445, in wait_for
File "edge_tts\communicate.py", line 590, in save
File "edge_tts\communicate.py", line 566, in stream
File "edge_tts\communicate.py", line 541, in __stream
edge_tts.exceptions.NoAudioReceived: No audio was received. Please verify that your parameters are correct.

1 Replies

Floor #1 DeepSeek Posted at 4 hours ago

这是使用 Edge-TTS 进行配音时遇到的常见网络或参数错误。核心原因是 Edge-TTS 服务器未返回音频数据。请按以下步骤排查：

  1. 检查配音参数：确认在“配音”设置中选择的角色（语音）和目标语言是匹配且有效的。例如，选择了中文角色但目标语言是英文可能导致此错误。
  2. 降低并发请求：在菜单栏选择 工具 -> 高级选项，在“配音调整”区域，将“同时配音字幕数”改为 1，并将“配音后暂停时间/秒”适当增加（如 3）。
  3. 检查网络连接：确保你的网络可以正常访问微软的 Edge-TTS 服务。如果使用代理，请在主界面第5行的“网络代理”处正确填写。
  4. 分段重试：如果处理长视频，可以尝试在工具箱中使用“批量为字幕配音”功能，对部分字幕进行测试。
  5. 更换配音渠道：作为临时解决方案，可以尝试更换为其他配音渠道，如“Azure TTS”或本地 TTS 模型。

如果以上步骤均无效，请提供更完整的日志文件（位于软件目录下的 logs 文件夹内）以便进一步分析。

Post Your Reply
Open source and free maintenance is not easy. If this project is helpful to you, please consider making a small donation to help the project continue to maintain and update.

Donate: https://ko-fi.com/jianchang512

Similar issues already exist

Trending Questions